Tags & SmartLinks

Everything about where your tags point, how the pages look, and what the scan figures mean.

Home is the page you land on after logging in. It lists every SmartLink the business has, grouped by campaign. A tag is the physical card, dot or QR code a customer scans. A SmartLink is the destination that tag sends them to. Every tag attached to a SmartLink goes wherever that SmartLink points.

  • Choose the business
    If you look after more than one business, click the one you want. The heading reads "SmartLinks for" followed by the business name.
  • Find the SmartLink
    Under "Campaign Groups", each group is headed "Campaign:" and the campaign name. Each SmartLink is a card showing its type icon, its name and its tag id (TS followed by letters and numbers, or TS and a number if it has no tag yet). SmartLinks with no campaign are listed under "Uncategorised".
  • Open, test or select a card
    Click a card to open it. On a computer, hover over a card for "Test", "Edit" and "Select". On a phone, tap the three dots in the corner of the card. "Test" opens the destination in a new tab, as a customer would see it.
  • Act on several at once
    "Select" adds the SmartLink to the "Selected SmartLinks" panel at the top of the page (on a phone you can also press and hold a card). The panel offers "Analytics", "Delete Analytics", "Set Expiry" and "Move to Bin", and shows how many of the 5 you have chosen.
  • Rename a campaign
    Click the pencil beside "Campaign:" and the name, type the new "Campaign Name" and click "Save".
  • Add a campaign, or move a SmartLink to another one
    Open a SmartLink and click "Add New Campaign", type the "Campaign Name" and click "Save". To move a SmartLink, open it, choose a different campaign from the "Campaign:" drop-down and click "UPDATE".

Good to know

  • Campaigns only organise the list, for example "Bar tables" or "Christmas 2026". They do not change what a tag does.
  • The counter under the Create button reads "You have created [number] of [number] SmartLinks." How many you can have depends on your plan. At the limit the "Create New SmartLink" button is greyed and the counter offers the Billing page.
  • A group called "Auto Expired QR Codes" can appear at the top of Home. It holds SmartLinks that have passed an expiry date TapSpot set. "Reactivate" puts them back to work; "Move to Bin" bins them.
  • SmartLinks made during a free trial sit in a "Free Trial" group and cannot be moved to another campaign until you choose a plan.

Messages you might see

"EXPIRED" (shown over a card)
The SmartLink's expiry date has passed. Select the card and use "Set Expiry" to change the date.
"No menu selected for this SmartLink"
A menu or price list page has no menu chosen. Open it, choose at least one and click "UPDATE".
"Switched off ยท switch on"
TapSpot has switched this SmartLink off, for example at the end of a free trial. Click the chip to switch it back on. If your plan is full, you are asked to choose one to switch off instead and click "Swap".
"Maximum of 5 items can be selected for comparison"
You already have five selected. Deselect one first.

Where a tag can point: the destination types

Click "Create New SmartLink" on Home and the "Select Type of SmartLink For Your QR Codes" page lists the types in groups. Click the small "i" beside a group heading to read what it is for. This is what each type does.

  • Review pages (Google Reviews, Trustpilot, Tripadvisor, Yelp, Checkatrade): the customer goes straight to your review page. This is the most common use of a tag. For Google Reviews, click "Auto Fill", check that the business Google found is yours, and TapSpot fills the address in; click "HELP" if it cannot. The other review sites need the address pasted in.
  • Web addresses (My Webpage, Facebook, Instagram, OpenTable, Deliveroo, Just Eat, Foodhub and others): the tag opens one web address. The type you pick only sets the icon on the Home card. Just Eat has its own "Auto Fill". The "Loyalty" type is also one of these: "The Loyalty SmartLink is for linking to your own third-party loyalty system."
  • Multi-Link: a branded page with up to 5 buttons, each going somewhere different. See The Multi-Link page and its buttons.
  • Menus (shown as "Price Lists" for non-food businesses): one or more of your menus or price lists as a page on the customer's phone. The menus themselves are built under Menus or Price Lists; see Menus & Products.
  • Allergens: the allergen details of the dishes on your chosen menus, so a customer can check before they order.
  • Form: one of your forms, for example a contact form, a feedback survey or an event sign-up. Forms are built under Forms; see Forms.
  • PDF: opens a PDF from your PDF library, for example a wine list or a brochure.
  • Gallery: a set of photos from your image library, for example the function room or the garden.
  • Download App: your own app. You give the Google Play and Apple App Store addresses (or search for the app by name). An Android phone goes to Google Play and an iPhone to the App Store; anything else sees a page with both buttons.
  • Loyalty App: a page where customers download the TapSpot loyalty app and join your Loyalty Scheme. It needs a scheme first; see Loyalty Schemes.
  • Staff access: a tag for your own staff, not customers. Scanning it opens the page where staff update menus or price lists, for example to mark a dish as sold out. The heading reads "Create Staff Access Page".

Good to know

  • Some groups are marked "Included with paid plans" or "Included with paid plans, or free during a free trial", with a padlock on their types. On the Free plan you cannot pick those types unless a free trial is running. Your plan is shown on the Billing page.
  • A web address must be complete and start with https://. "TEST LINK" stays greyed until it is. "https://" on its own is not accepted.
  • Every web address is checked before it is saved. An unsafe one is refused with a "Security Alert" dialog, and nothing is saved while the block stands.
  • The Multi-Link type reads "Limit reached" when you have as many Multi-Link pages as your plan allows. The Loyalty App type reads "Requires loyalty scheme" until you have one.

Creating a SmartLink has three parts: choose the type, fill in the details and click "CREATE". Changing where a tag points is a matter of opening its SmartLink, changing the details and clicking "UPDATE". The change applies to every tag on that SmartLink at once.

  • Click "Create New SmartLink"
    On Home. The button also says "QR Code / NFC Tag". Choose a type from the list described in the card above.
  • Choose a campaign
    Pick one from the "Campaign:" drop-down, or click "Add New Campaign". If you have no campaigns yet, one called "Default" is made for you when you click "CREATE".
  • Fill in the details for the type
    A web address, a menu, a form, a PDF, a set of images, and so on. Review and web-address SmartLinks also have a name that is shown on the Home card: for a review site, click the pencil beside "SmartLink name:"; for a web address, type it in "Name of link".
  • Click "TEST PAGE"
    It opens what a customer will see in a new tab, including changes you have not saved yet. "TEST LINK" under a web address opens that one address.
  • Click "CREATE"
    The page reloads with the tag id in the heading, and "Cards, Dots and other Products" appears underneath. That is where every tag on the SmartLink is listed.
  • To change where a tag points, open its SmartLink
    Click the card on Home. The heading reads "Update" followed by the type and the tag id. Change the details and click "UPDATE". Wait for "Updated successfully!". Changes made in "Page Settings" also need "UPDATE".
  • Register a tag you have been sent
    Cards and dots from TapSpot arrive ready to use but not yet pointing anywhere. Scan the tag with your phone and log in. A box headed "So you want to set up a new tag?" follows you from page to page. Click "Create New SmartLink" and the tag is attached when you click "CREATE". Or open one of your existing SmartLinks and click "Register Tag On This Link".
  • Turn a single destination into a Multi-Link page
    Hover over the type icon on the SmartLink (the three dots on a phone) and choose "Convert to Multi-Link". The dialog warns "Are you sure you want to convert this SmartLink to a Multi-Link page? There will be no going back." The original destination becomes the first button.

Good to know

  • Each tag card under "Cards, Dots and other Products" shows "Asset ID:" with the tag id for a TapSpot product, or "Not assigned" for a free QR code you print yourself. To print your own, click the QR code picture, then "Download QR Code".
  • "Test Link" on a tag card opens the tag's own link exactly as a scan would. "Copy Link" copies it so you can paste it into an email or a message.
  • To name a tag, click the pencil beside its name and click "Save". Tick "This is a team member's name" if the tag belongs to a member of staff who should be named on the review screen.
  • "Actions" at the foot of a tag card offers "Design a Poster", which makes a printable poster carrying that QR code with your text, logo and business details.
  • Staff access SmartLinks cannot be converted to a Multi-Link page.

Messages you might see

"You must specify a campaign"
Choose a campaign before clicking "CREATE".
"Please enter a valid URL for all URL links"
A web address is missing or incomplete. It must start with https:// and contain a full site name.
"Security Alert" with "One or more URLs in your link have been blocked for security reasons:"
The dialog lists each blocked address with a "Reason:". Use a different address and save again.
"Page style updated. Click Update to save."
A change from "Page Settings" is on screen but not yet saved. Click "UPDATE".
"This QR code does not exist or has been deleted"
The SmartLink is in the bin or has been deleted for good. Check the bin on Home.

A Multi-Link page is a branded landing page with up to 5 buttons. When a customer scans the tag they see your logo, your address and the buttons you add: your menu, a review page, a booking site, a form, a PDF, a gallery, your app, your Loyalty Scheme, your social media, any web address, or another of your pages.

  • Choose "Multi-Link" on the type page
    The heading reads "Create Multi-Links Page". A sketch shows what the page will contain.
  • Click "+ Add New Link/Button"
    The "Choose Link/Button Type" dialog lists "+ ADD LINK (WEBPAGE)", "+ ADD GOOGLE REVIEWS LINK", "+ ADD LINK TO ANOTHER PAGE", "+ ADD MENU" (or "+ ADD PRICE LIST"), "+ ADD ALLERGENS" (food businesses only), "+ ADD FORM", "+ ADD PDF LINK", "+ ADD IMAGE GALLERY", "+ ADD LOYALTY APP LINK", "+ ADD APP STORE LINK" and "+ ADD SOCIAL MEDIA LINKS".
  • Set the button up
    In "Configure Button", type the "Button Text", then make the choice for that type (a web address, a menu, a form, a PDF, images, store addresses). Click "Done". Some types fill the text in for you; you can change it.
  • Link to another of your pages
    For "+ ADD LINK TO ANOTHER PAGE", the "Select a page to link to" dialog lists your other SmartLinks as tiles with their tag id, name and type. Click one. The page you are editing and staff access pages are not offered.
  • Add social media buttons
    For "+ ADD SOCIAL MEDIA LINKS", the dialog lists the accounts in your business details. Tick the ones to include and give each a "Button Text". If you tick more than one, also fill in the "Main Button Text". A button with one account opens it directly; a button with several opens a small list. Click "Edit Business Info" if an account is missing.
  • Reorder, style or remove a button
    Beside each button are a cog ("Configure this button"), a palette ("Style this button"), a drag handle ("Drag me up and down, to reorder") and a bin ("Delete this button"). The palette sets the border, background colour and lettering; "Apply" styles this button, "Apply All" every button on the page.
  • Test and save
    Click a button's preview ("Click to test button") to open what it does, or "TEST PAGE" to see the whole page. Then click "CREATE" or "UPDATE".

Good to know

  • The limit is 5 buttons: "You can only add up to 5 links". For more, put links on one of your other pages and use "+ ADD LINK TO ANOTHER PAGE".
  • What the customer sees when they tap: a menu or allergens page opens in the same tab; a form opens on the page itself; a PDF opens in a new tab and its button carries a small PDF icon; a gallery opens as thumbnails; an app store button shows the store that matches their phone; a social media or web address button opens in a new tab. Every tap on a button is counted in your figures.
  • Every Multi-Link page, menu page and download app page has a white "Accessibility" button at the top left. It offers "S", "M" and "L" text sizes and a "High contrast" switch. High contrast replaces your background with plain yellow, makes all text black and every button white with a black border, so your styling is ignored while it is on.
  • A button with a very light or white background gets a faint outline on the customer's page so it does not disappear.
  • If a "link to another page" button points at a SmartLink that is in the bin, the button is left off the customer's page. The SmartLink page shows "Not shown on your page: the SmartLink it opened has been deleted." Restore the SmartLink, or press the cog and choose another page.

Messages you might see

"Button text is required"
"Done" stays greyed until the button has some text.
"No social media links have been set for this business. Click "Edit Business Info" above to add them."
Add the accounts to your business details first.
"Please enter a valid URL for all URL links", "Please select a form for all form links", "Please select a menu for all specific menu links"
A button is incomplete. Open it with the cog and finish it.
"You have reached the maximum number of multi-link pages for this business."
Your plan's allowance of Multi-Link pages is used up. "CREATE" is greyed.

Page style, logo and opening hours

The "Page Settings" button, beside the type icon on a SmartLink, controls how the page your customer lands on looks: the background, what shows at the top, and the icons at the foot. It applies to Multi-Link, menu and price list, allergens, form, download app and loyalty app pages. A review page has no Page Settings.

  • Click "Page Settings"
    The dialog opens on the "Page Style" tab. The other two tabs are "Page Options" and "Page Links".
  • Pick a background
    "Your Page Style Library" shows each style as a small preview with your business name on it. Click one to choose it. Click the "+" box at the end to open "Search Background Images", type a word or two, and click a picture to add it to your library. A style you added shows a small cross in its corner; click it to remove the style.
  • Fine-tune the chosen style
    Click "Configure" on the selected style to open "Theme Configuration": "Image Brightness", "Background Tint Colour", "Background Blur", "Link Effect" ("No Effect", "Slide In" or "Fade In"), "Highlighting Shadow" and its colour. The preview updates as you go. Click "Save".
  • Choose what shows at the top
    On the "Page Options" tab, switch on "Show Business Logo" (then pick "Size S" to "Size XL" and, if you like, "Outline around logo"), "Show Bus. Name", "Show Address", "Show Opening Hours" and the "Phone Number". The logo itself is uploaded in your business details, not here.
  • Choose the icons at the foot
    The "Page Links" tab lists your map, customer service email, website and social media addresses, each with a switch. They start as the ones in your business profile. Type a different address to use it on this page only; your profile is not altered. An icon only appears when its address is filled in and its switch is on.
  • Click "Apply", then "UPDATE"
    "Apply" keeps your choices in the dialog. The SmartLink page then reminds you to click "UPDATE". On a new SmartLink the choices are saved when you click "CREATE".

Good to know

  • Opening hours are set in Edit Business, on the "Opening Hours" tab. Switch each day to "Open" or "Closed", set "Opens" and "Closes", and click "Add another session" for a lunchtime and an evening service. "Use these hours every day" copies one day to the rest. "Special dates" cover bank holidays, private parties and days you are shut. "Allow before opening" and "Allow after closing" let scans a little outside your hours count as during opening hours.
  • With "Show Opening Hours" on, the page shows today's hours first, for example "Today: 11:00 to 23:00". The same hours are used by Scan Times (see the next card).
  • Each SmartLink has its own Page Settings. The same background on two SmartLinks can have different brightness, tint and effects.
  • Backgrounds from the picture search are stock photos; the customer's page carries a small "Photo by ... on Pexels" credit under the buttons.
  • If the buttons are hard to read on a photo, lower "Image Brightness", add a "Background Tint Colour" or switch on "Background Blur".

Messages you might see

"Please upload a logo image first to configure its display options. (You can do this in Business Settings)"
The logo switch is on but no logo is on file. Upload one in your business details, then come back.
"No opening hours have been set for this business yet, so nothing will show on the page. Set them in Edit Business, on the Opening Hours tab."
The page leaves the hours out until you set some.
"Page settings updated and saved successfully!"
Your choices were applied. Now click "UPDATE" on the SmartLink page.
"Original link data not found. Please close and reopen."
Close Page Settings and open it again before clicking "Apply".

Limiting when a tag works: scan times and expiry dates

There are two ways to limit a tag. Scan Times stops a review tag working outside the hours you choose, so a review request cannot be scanned at three in the morning. An expiry date gives any SmartLink an end date, for a seasonal menu or a short promotion.

  • Open a review SmartLink and click "Scan Times"
    The button reads "Scan Times: Off", "Scan Times: On", "Scan Times:" followed by today's permitted times, or "Scan Times: Disabled until" and the next time the tag will work. Only review SmartLinks have it.
  • Add opening hours if asked
    If the dialog reads "Limiting scan times requires that business hours are set.", click "Add Business Hours", fill in the week and click "Save business hours". What you save becomes your business's opening hours, not a copy for this tag.
  • Turn on "Limit scan times: on"
    The dialog explains: "When this is on, the card only works during the times below. Outside them, whoever scans it sees a message saying the card is not available right now, and the review page does not open. Those attempts still appear in View Logs & Scores, but they are never counted."
  • Adjust single days if you need to
    Under "When the card may be used", each day follows your opening hours and is labelled "Business hours". Click "Change for this SmartLink" to give a day its own "From" and "Until" times, "Add another session" for a split day, or switch the day to "Scans not allowed". "Use business hours" puts a day back. Click "Update".
  • Set an expiry date
    On Home, select up to five SmartLinks and click "Set Expiry". In "Set Expiry Date & URL", pick the date, then choose "Use Standard Tapspot URL" to send scans to the TapSpot expired page, or "Use Custom URL" and type your own web address. Click "TEST" to see it, then "Save".

Good to know

  • Outside the permitted times the customer sees "This card is being used outside its permitted hours." and "The review page will not open outside permitted hours." The attempt appears in "View Logs & Scores" as "Blocked (outside scan times)". It is never counted and cannot be set aside or reinstated.
  • A day you change in Scan Times applies to this SmartLink only. The other days follow your opening hours, so a change in Edit Business flows through to them.
  • After the expiry date, if you chose the standard page, a customer sees "This link has expired" and "Please contact the business for more information." with a "Visit Tapspot" button. With your own address they see your page instead. The card on Home shows "EXPIRED". To bring the link back, set a later date.
  • An expiry applies to every tag that points at that SmartLink. How far ahead you can set the date may depend on your plan.
  • A review SmartLink can also show a short screen before the review site: the switch "Show a short TapSpot screen before the review site(s)". It asks the customer for a review, can name the team member whose tag was scanned (the tag must be marked "This is a team member's name"), and can offer a second review site. "Change style" offers five fixed wordings and a "Made for you" one. Nothing in that panel is saved until you click "UPDATE".

Messages you might see

"Scan Times: Disabled until ..."
The tag is outside its permitted times right now. The label says when it next works.
"URL is required"
"Use Custom URL" is chosen but the box is empty.
A message ending "Maximum allowed date: [date]"
The expiry date is later than your plan allows. Choose an earlier one.
"You have reached today's limit for new styles."
"Regenerate" on the "Made for you" wording has been used as often as allowed today. Pick one of the fixed options or try tomorrow.

The scan figures and the scan log

Every tag card under "Cards, Dots and other Products" has a "Performance Metrics" panel. A scan is a QR code read; a tap is an NFC touch. The figures only include counted scans. The scan log shows every scan behind a figure, counted or not, and lets you take one out or put one back.

  • Choose the period
    At the top of the section, click "Today", "Last 12 hr", "Last 24 hr", "Yesterday" or "Custom". Every tag card changes to the same period. "Custom" opens two clocks with the hint "Any time in the last 24 hours.", an "Opening time" switch (offered when you have opening hours for today) and an "Until now" switch. Click "Apply".
  • Read the figure
    The large number is the counted scans in that period. The label under it says which: "Scans today", "Scans, last 12 hours", "Scans yesterday" and so on. A tag with a chip has "QR Code" and "NFC" tabs so you can see scans and taps separately. Older tags show one figure with "Combined QR Code and NFC count".
  • Read "Last scanned"
    When the tag was last used, as "Today", "Yesterday", "3 days ago" and so on, with the exact date and time underneath. It is the most recent counted scan; a scan that has been set aside does not move it. "Analytics cleared" with a date means the tag's history was deleted and nothing has been counted since.
  • Read or reset the total
    "Total scans" (or "Total taps") at the foot of the panel is the running total since the last reset, with "since" and a date once it has been reset. "Reset total" opens "Reset Scans": "This sets the scan count back to zero. Your scan history is kept, so the charts and the last scanned date stay as they are." Tick "Also delete this product's scan history" to wipe the history too; the button then reads "Reset & Delete". Deleting the history cannot be undone.
  • Open the scan log
    Click "View Logs & Scores". The "Scan Log & Scores" dialog opens on the last 7 days for that tag. Change "Period", "Tag", "Type", "Confidence", "Opening hours" or "Counted" and click "Apply". The strip at the top reads "Raw scans", "Counted", "Automatically excluded", "Manually set aside" and, when there are any, "Blocked (outside scan times)".
  • Read a row
    Each row shows when, which tag, the type ("QR scan" or "NFC tap", with "test" for a scan made with "Test Link"), a "Confidence" label ("Likely customer" in green, "Possible customer" in amber, "Unlikely customer" in red) and "Counted" as "Yes" or "No". Under a "No" is the reason: "automated", "set aside", "same phone again" or "outside scan times". Click a row to read "Why this confidence" in plain English.
  • Set a scan aside, or count it again
    Click "Set aside" on a counted row. The dialog "Set this scan aside" reads "It will be left out of your scan figures. Your bill is not affected either way." Choose a "Reason", add a "Note (optional)" and click "Set aside". To put a scan back, click "Reinstate", choose a reason and click "Count it". The figures on the tag cards update.
  • See the charts
    On Home, select a SmartLink and click "Analytics" in the "Selected SmartLinks" panel. "Summary" charts "QR Code Scans" and "NFC Taps" over time; "Detailed" has one line per tag; "Last Used" lists every tag with a dot: green "Used this week", amber "Not used for over a week", red "Not used for two weeks or more", grey "Never used". Choose "All", "Weekly" or "Monthly". Select up to five SmartLinks to compare them on one chart.

Good to know

  • If the same phone scans the same tag again within 10 minutes, the second scan is set aside automatically as the same customer. Its row shows "Repeated scan" in red. If it really was someone else, click "Reinstate".
  • A set-aside scan is left out of the card figures, the totals and the charts. A reinstated scan is put back into all of them. Decisions never change your bill. The log always shows its working, for example "Scans on 03/10/2026 (1 set aside)", and a chart reads "Includes decisions you have made: 2 set aside, 1 reinstated."
  • "Set aside" and "Reinstate" are only available for recent scans; older scans cannot be changed.
  • The "Confidence" label never changes whether a scan is counted. A record of scans is exact; as a record of people it is an estimate, and that is what the label tells you.
  • "Today" and "Yesterday" follow your reporting day, which can start at a time other than midnight. The scan log says what yours is. Times are shown in the business's own local time.
  • Scans of the same tag close together are shown as one block, for example "3 scans of Bar card within 12 seconds". That only groups them on screen; each keeps its own "Counted".
  • Every line on a chart is a running total, so lines only go up. A flat stretch means no scans in that period.
  • "Delete Analytics" in the "Selected SmartLinks" panel wipes the scan history of the selected SmartLinks so the charts and last-used dates start again. The totals are kept unless you tick "Also set the scan and tap totals back to zero". It cannot be undone.

Messages you might see

"No scans in this period."
Nothing matches the filters. Widen the period or set "Counted" and "Type" back to "All".
"Counted and excluded figures are for this page (1 of 3)."
The period runs to more than one page, so those two strip figures only cover what is on screen. "Raw scans" and "Manually set aside" cover the whole period.
"Opening hours have not been set for this business. Set them from Edit Business to see whether scans happened while you were open."
The opening-hours filter reads "Unknown" until hours are set.
"No scan data available"
Nothing has been recorded for this SmartLink yet. The dialog opens on "Last Used" instead, which still shows which tags have never been scanned.
"That range could not be used."
A custom range must end after it starts, no later than now, and within the last 24 hours.

Bin and restore, lost or replaced cards

The bin holds SmartLinks you have removed. Anything in it is deleted for good after 30 days; until then you can restore it. A damaged or lost card is handled differently: you order a replacement for the tag, and the SmartLink stays as it is.

  • Move SmartLinks to the bin
    On Home, "Select" up to 5 cards and click "Move to Bin" in the "Selected SmartLinks" panel. The dialog warns "Items will be permanently deleted after 30 days." Type DELETE in the "Type DELETE to confirm" box and click "Move to Bin".
  • Open the bin
    Click the red bin button at the bottom right of Home. It only appears when the bin has something in it. Each item shows its tag id, its name, "Deleted:" with the date, how many "days left", and its type.
  • Restore
    Tick the items and click "Restore Selected". They go back to their campaigns on Home. Restoring counts against your plan's SmartLink allowance.
  • Empty the bin
    Click "Empty Bin", read "Are you sure you want to permanently delete all [number] items? This action cannot be undone." and click "Delete Permanently".
  • Order a replacement for a damaged or lost card
    Open the SmartLink, find the tag under "Cards, Dots and other Products" and choose "Actions", then "Order a replacement". Give the reason: "Damaged or worn" ("The old card keeps working until the new one arrives") or "Lost or stolen" ("Stop the old card now: anyone scanning it sees a "this card has been replaced" notice"). Choose "How many". The dialog shows the price and the shipping charge, and whether it goes "at checkout" or on an account's "next invoice".
  • Delete a tag for good
    "Actions", then "Delete Asset". The dialog reads "Are you sure you want to delete this link? Please note, after deleting this product will no longer function, and there is no UNDO to get it back". The physical tag stops working.

Good to know

  • A replacement card carries the same tag id, so its scan history and figures carry on. While it is on order the card reads "Replacement on order" and has no "Actions" until the order is marked as sent.
  • A card reported lost or stolen shows the customer "This card has been replaced." with "The owner has reported it lost or stolen and a new one is on its way. Please ask a member of staff for the new card." Once the replacement has been sent, scans go to the destination again.
  • A free QR code you printed yourself has nothing to replace. "Order a replacement" is greyed with "Free QR codes are printed by you, so there is nothing to replace: just print it again".
  • "Order more products" under the tag cards buys more cards, dots or other products for that SmartLink.
  • Binning a SmartLink that a Multi-Link button points at hides that button on the customer's page until you restore it.

Messages you might see

"Please type DELETE exactly"
The confirmation box does not match. Type DELETE in capitals.
"Cannot restore this item. You have reached your limit of [number] active links. Please delete or move an existing link to the bin first."
Restoring would take you over your plan's SmartLink allowance. Make room first, or choose a bigger plan on the Billing page.
"This product is not on your plan's price list, so a replacement cannot be ordered online. Please contact us."
That product cannot be reordered from the screen.
"This pub's TapSpot orders are arranged by" followed by an account name
Your orders are placed by someone else. The dialog names who to contact.

Problems and what to check

  • A customer sees "This link has expired". The SmartLink has an expiry date in the past. Its card on Home reads "EXPIRED". Select it, click "Set Expiry" and choose a later date.
  • A customer sees "This card is being used outside its permitted hours." Scan Times is on and the tag is outside its times. Check the "Scan Times" button on the SmartLink. In "View Logs & Scores", set "Counted" to "Blocked (outside scan times)" to see the attempt and why.
  • A customer sees "This card has been replaced." That card was reported lost or stolen and a replacement is on order. The old card stays stopped until the new one is sent.
  • A customer sees "Link Temporarily Unavailable". The link has been switched off. Log in and look for a "Security Alert" dialog; if it names this SmartLink, open it, change the web address and click "UPDATE".
  • A customer sees "This link is busier than expected". Your plan's monthly allowance of visits is used up. The customer can still tap "Take me there" and reach the destination. The Billing page warning says which allowance is reached and offers bigger plans; allowances start again on the 1st.
  • Customers reach Google but not the review box. Check the address is the "write a review" address, not your general Google listing. "Auto Fill" fills in the right one.
  • Your change is not showing for customers. Make sure you clicked "UPDATE" and saw "Updated successfully!". Changes from "Page Settings" and from the review screen panel also need "UPDATE".
  • A button is missing from a Multi-Link page. Open the SmartLink. Check the button has a destination, and look for "Not shown on your page: the SmartLink it opened has been deleted."
  • Buttons look different from your styling. The customer may have "High contrast" or a larger text size switched on in the "Accessibility" bar.
  • The big figure is 0 but "Total scans" is not. The period at the top of the section covers a window with no scans. Change it to "Today" or widen it.
  • The figure did not go up after "Test Link". Wait a moment or reload the page. If it still has not changed, open "View Logs & Scores" and look for the scan: it may be marked "test", "same phone again" or "automated".
  • "Create New SmartLink" is greyed. You are at your plan's limit. Move an unused SmartLink to the bin, or choose a bigger plan on the Billing page.
  • A SmartLink has vanished from its campaign. Look in "Auto Expired QR Codes" at the top of Home, and in the bin (the red button at the bottom right).
  • Nothing opens when you click a test button. Your browser may be blocking pop-ups for TapSpot. Allow them and try again.
  • Opening hours do not show on a customer page. Switch on "Show Opening Hours" in that SmartLink's "Page Settings", on the "Page Options" tab, click "Apply" and then "UPDATE". If the tab says no hours are set, set them in Edit Business first.
  • iPhone users are sent to Google Play. The Apple App Store address is missing from the Download App SmartLink. Add it and click "UPDATE".

Still stuck? Email support@tapspot.link and tell us which screen you were on.